This is unpublished documentation of working with Rust and WebAssembly, the published documentation is available on the main Rust and WebAssembly documentation site . Features documented here may not be available in released versions of tooling for Rust and WebAssembly.

Shrinking .wasm Code Size

This section will teach you how to optimize your .wasm build for a small code size footprint, and how to identify opportunities to change your Rust source such that less .wasm code is emitted.

Why Care About Code Size?

When serving a .wasm file over the network, the smaller it is, the faster the client can download it. Faster .wasm downloads lead to faster page load times, and that leads to happier users.

However, it's important to remember though that code size likely isn't the end-all-be-all metric you're interested in, but rather something much more vague and hard to measure like "time to first interaction". While code size plays a large factor in this measurement (can't do anything if you don't even have all the code yet!) it's not the only factor.

WebAssembly is typically served to users gzip'd so you'll want to be sure to compare differences in gzip'd size for transfer times over the wire. Also keep in mind that the WebAssembly binary format is quite amenable to gzip compression, often getting over 50% reductions in size.

Furthermore, WebAssembly's binary format is optimized for very fast parsing and processing. Browsers nowadays have "baseline compilers" which parses WebAssembly and emits compiled code as fast as wasm can come in over the network. This means that if you're using instantiateStreaming the second the Web request is done the WebAssembly module is probably ready to go. JavaScript, on the other hand, can often take longer to not only parse but also get up to speed with JIT compilation and such.

And finally, remember that WebAssembly is also far more optimized than JavaScript for execution speed. You'll want to be sure to measure for runtime comparisons between JavaScript and WebAssembly to factor that in to how important code size is.

All this to say basically don't dismay immediately if your .wasm file is larger than expected! Code size may end up only being one of many factors in the end-to-end story. Comparisons between JavaScript and WebAssembly that only look at code size are missing the forest for the trees.

Optimizing Builds for Code Size

There are a bunch of configuration options we can use to get rustc to make smaller .wasm binaries. In some cases, we are trading longer compile times for smaller .wasm sizes. In other cases, we are trading runtime speed of the WebAssembly for smaller code size. We should be cognizant of the trade offs of each option, and in the cases where we trade runtime speed for code size, profile and measure to make an informed decision about whether the trade is worth it.

Compiling with Link Time Optimizations (LTO)

In Cargo.toml, add lto = true in the [profile.release] section:

[profile.release]
lto = true

This gives LLVM many more opportunities to inline and prune functions. Not only will it make the .wasm smaller, but it will also make it faster at runtime! The downside is that compilation will take longer.

Tell LLVM to Optimize for Size Instead of Speed

LLVM's optimization passes are tuned to improve speed, not size, by default. We can change the goal to code size by modifying the [profile.release] section in Cargo.toml to this:

[profile.release]
opt-level = 's'

Or, to even more aggressively optimize for size, at further potential speed costs:

[profile.release]
opt-level = 'z'

Note that, surprisingly enough, opt-level = "s" can sometimes result in smaller binaries than opt-level = "z". Always measure!

Use the wasm-opt Tool

The Binaryen toolkit is a collection of WebAssembly-specific compiler tools. It goes much further than LLVM's WebAssembly backend does, and using its wasm-opt tool to post-process a .wasm binary generated by LLVM can often get another 15-20% savings on code size. It will often produce runtime speed ups at the same time!

# Optimize for size.
wasm-opt -Os -o output.wasm input.wasm

# Optimize aggressively for size.
wasm-opt -Oz -o output.wasm input.wasm

# Optimize for speed.
wasm-opt -O -o output.wasm input.wasm

# Optimize aggressively for speed.
wasm-opt -O3 -o output.wasm input.wasm

Notes about Debug Information

One of the biggest contributors to wasm binary size can be debug information and the names section of the wasm binary. The wasm-pack tool, however, removes debuginfo by default. Additionally wasm-opt removes the names section by default unless -g is also specified.

This means that if you follow the above steps you should by default not have either debuginfo or the names section in the wasm binary. If, however, you are manually otherwise preserving this debug information in the wasm binary be sure to be mindful of this!

Size Profiling

If tweaking build configurations to optimize for code size isn't resulting in a small enough .wasm binary, it is time to do some profiling to see where the remaining code size is coming from.

⚡ Just like how we let time profiling guide our speed up efforts, we want to let size profiling guide our code size shrinking efforts. Fail to do this and you risk wasting your own time!

The twiggy Code Size Profiler

twiggy is a code size profiler that supports WebAssembly as input. It analyzes a binary's call graph to answer questions like:

  • Why was this function included in the binary in the first place?

  • What is the retained size of this function? I.e. how much space would be saved if I removed it and all the functions that become dead code after its removal?

$ twiggy top -n 20 pkg/wasm_game_of_life_bg.wasm
 Shallow Bytes │ Shallow % │ Item
───────────────┼───────────┼────────────────────────────────────────────────────────────────────────────────────────
          9158 ┊    19.65% ┊ "function names" subsection
          3251 ┊     6.98% ┊ dlmalloc::dlmalloc::Dlmalloc::malloc::h632d10c184fef6e8
          2510 ┊     5.39% ┊ <str as core::fmt::Debug>::fmt::he0d87479d1c208ea
          1737 ┊     3.73% ┊ data[0]
          1574 ┊     3.38% ┊ data[3]
          1524 ┊     3.27% ┊ core::fmt::Formatter::pad::h6825605b326ea2c5
          1413 ┊     3.03% ┊ std::panicking::rust_panic_with_hook::h1d3660f2e339513d
          1200 ┊     2.57% ┊ core::fmt::Formatter::pad_integral::h06996c5859a57ced
          1131 ┊     2.43% ┊ core::str::slice_error_fail::h6da90c14857ae01b
          1051 ┊     2.26% ┊ core::fmt::write::h03ff8c7a2f3a9605
           931 ┊     2.00% ┊ data[4]
           864 ┊     1.85% ┊ dlmalloc::dlmalloc::Dlmalloc::free::h27b781e3b06bdb05
           841 ┊     1.80% ┊ <char as core::fmt::Debug>::fmt::h07742d9f4a8c56f2
           813 ┊     1.74% ┊ __rust_realloc
           708 ┊     1.52% ┊ core::slice::memchr::memchr::h6243a1b2885fdb85
           678 ┊     1.45% ┊ <core::fmt::builders::PadAdapter<'a> as core::fmt::Write>::write_str::h96b72fb7457d3062
           631 ┊     1.35% ┊ universe_tick
           631 ┊     1.35% ┊ dlmalloc::dlmalloc::Dlmalloc::dispose_chunk::hae6c5c8634e575b8
           514 ┊     1.10% ┊ std::panicking::default_hook::{{closure}}::hfae0c204085471d5
           503 ┊     1.08% ┊ <&'a T as core::fmt::Debug>::fmt::hba207e4f7abaece6

Manually Inspecting LLVM-IR

LLVM-IR is the final intermediate representation in the compiler toolchain before LLVM generates WebAssembly. Therefore, it is very similar to the WebAssembly that is ultimately emitted. More LLVM-IR generally means more .wasm size, and if a function takes up 25% of the LLVM-IR, then it generally will take up 25% of the .wasm. While these numbers only hold in general, the LLVM-IR has crucial information that is not present in the .wasm (because of WebAssembly's lack of a debugging format like DWARF): which subroutines were inlined into a given function.

You can generate LLVM-IR with this cargo command:

cargo rustc --release -- --emit llvm-ir

Then, you can use find to locate the .ll file containing the LLVM-IR in cargo's target directory:

find target/release -type f -name '*.ll'

References

More Invasive Tools and Techniques

Tweaking build configurations to get smaller .wasm binaries is pretty hands off. When you need to go the extra mile, however, you are prepared to use more invasive techniques, like rewriting source code to avoid bloat. What follows is a collection of get-your-hands-dirty techniques you can apply to get smaller code sizes.

Avoid String Formatting

format!, to_string, etc... can bring in a lot of code bloat. If possible, only do string formatting in debug mode, and in release mode use static strings.

Avoid Panicking

This is definitely easier said than done, but tools like twiggy and manually inspecting LLVM-IR can help you figure out which functions are panicking.

Panics do not always appear as a panic!() macro invocation. They arise implicitly from many constructs, such as:

  • Indexing a slice panics on out of bounds indices: my_slice[i]

  • Division will panic if the divisor is zero: dividend / divisor

  • Unwrapping an Option or Result: opt.unwrap() or res.unwrap()

The first two can be translated into the third. Indexing can be replaced with fallible my_slice.get(i) operations. Division can be replaced with checked_div calls. Now we only have a single case to contend with.

Unwrapping an Option or Result without panicking comes in two flavors: safe and unsafe.

The safe approach is to abort instead of panicking when encountering a None or an Error:


# #![allow(unused_variables)]
#fn main() {
#[inline]
pub fn unwrap_abort<T>(o: Option<T>) -> T {
    use std::process;
    match o {
        Some(t) => t,
        None => process::abort(),
    }
}
#}

Ultimately, panics translate into aborts in wasm32-unknown-unknown anyways, so this gives you the same behavior but without the code bloat.

Alternatively, the unreachable crate provides an unsafe unchecked_unwrap extension method for Option and Result which tells the Rust compiler to assume that the Option is Some or the Result is Ok. It is undefined behavior what happens if that assumption does not hold. You really only want to use this unsafe approach when you 110% know that the assumption holds, and the compiler just isn't smart enough to see it. Even if you go down this route, you should have a debug build configuration that still does the checking, and only use unchecked operations in release builds.

Avoid Allocation or Switch to wee_alloc

Rust's default allocator for WebAssembly is a port of dlmalloc to Rust. It weighs in somewhere around ten kilobytes. If you can completely avoid dynamic allocation, then you should be able to shed those ten kilobytes.

Completely avoiding dynamic allocation can be very difficult. But removing allocation from hot code paths is usually much easier (and usually helps make those hot code paths faster, as well). In these cases, replacing the default global allocator with wee_alloc should save you most (but not quite all) of those ten kilobytes. wee_alloc is an allocator designed for situations where you need some kind of allocator, but do not need a particularly fast allocator, and will happily trade allocation speed for smaller code size.

Use Trait Objects Instead of Generic Type Parameters

When you create generic functions that use type parameters, like this:


# #![allow(unused_variables)]
#fn main() {
fn whatever<T: MyTrait>(t: T) { ... }
#}

Then rustc and LLVM will create a new copy of the function for each T type that the function is used with. This presents many opportunities for compiler optimizations based on which particular T each copy is working with, but these copies add up quickly in terms of code size.

If you use trait objects instead of type parameters, like this:


# #![allow(unused_variables)]
#fn main() {
fn whatever(t: Box<MyTrait>) { ... }
// or
fn whatever(t: &MyTrait) { ... }
// etc...
#}

Then dynamic dispatch via virtual calls is used, and only a single version of the function is emitted in the .wasm. The downside is the loss of the compiler optimization opportunities and the added cost of indirect, dynamically dispatched function calls.

Use the wasm-snip Tool

wasm-snip replaces a WebAssembly function's body with an unreachable instruction. This is a rather heavy, blunt hammer for functions that kind of look like nails if you squint hard enough.

Maybe you know that some function will never be called at runtime, but the compiler can't prove that at compile time? Snip it! Afterwards, run wasm-opt again with the --dce flag, and all the functions that the snipped function transitively called (which could also never be called at runtime) will get removed too.

This tool is particularly useful for removing the panicking infrastructure, since panics ultimately translate into traps anyways.